Book TV unit installation Services starting at INR in Hyderabad

TV unit installation - in hHere are some key specifications to consider when installing a TV unit: 1. TV Unit Location * Viewing Distance: The distance between your TV and seating area is crucial for comfortable viewing. A general rule is to multiply the screen size by 1.5 to determine the ideal viewing distance. * Eye Level: The center of the TV screen should be at eye level when seated. This minimizes neck strain and ensures an optimal viewing experience. * Lighting: Avoid placing the TV in direct sunlight or near windows that cause glare. This can make it difficult to see the screen and may damage the TV over time. * Power Outlets: Ensure there are enough power outlets near the TV unit to accommodate the TV and any other devices you plan to connect. 2. TV Unit Design * Size and Dimensions: The TV unit should be large enough to accommodate your TV comfortably, with a few inches of space on either side. Consider the dimensions of your TV and the available space in your room. * Weight Capacity: Make sure the TV unit can support the weight of your TV. Check the manufacturer's specifications for the weight capacity of the unit. * Storage: Consider your storage needs. Do you need shelves for media players, gaming consoles, or other devices? Do you want drawers or cabinets to hide clutter? * Style: Choose a TV unit that complements your existing décor and personal style. There are many different styles to choose from, including modern, contemporary, traditional, and rustic. 3. Wall Mounting * Wall Type: If you plan to wall mount your TV, make sure the wall is strong enough to support the weight of the TV. Drywall may require special anchors or mounting brackets. * Stud Location: If mounting on a stud wall, locate the studs and use them to secure the mounting brackets. This will ensure a stable and secure installation. * Cable Management: Plan how you will manage the cables from the TV to other devices. Consider using cable ties or a cable management system to keep the cables organized and hidden. 4. Installation * Professional Installation: If you are not comfortable installing the TV unit yourself, consider hiring a professional installer. They will have the expertise and tools to ensure a safe and proper installation. * Assembly Instructions: If you are assembling the TV unit yourself, follow the manufacturer's instructions carefully. Make sure you have all the necessary tools and hardware. * Safety: Always prioritize safety when installing a TV unit. Make sure the unit is stable and secure, and that all cables are properly managed to prevent tripping hazards. Additional Tips: * Measure twice, buy once. Always measure the dimensions of your TV and the available space in your room before purchasing a TV unit. * Consider the viewing angle. Make sure the TV is positioned so that everyone in the room can see the screen comfortably. * Think about the future. Choose a TV unit that can accommodate a larger TV if you plan to upgrade in the future. * Don't forget the accessories. Consider purchasing a soundbar, media player, or other accessories to enhance your viewing experience. By considering these key specifications, you can ensure a successful and enjoyable TV unit installation. ome specifications

30min INR 210 INR 300 https://www.globaltechnology2814.com/services/tv-unit-installation/121

Description

TV unit installation typically involves these steps: ✔ Planning and Preparation: ✔ Measure the wall and TV to determine the ideal placement and size for the unit. ✔ Consider viewing angles and distance from seating areas. ✔ Locate wall studs for secure mounting. ✔ Gather necessary tools: drill, level, screwdriver, measuring tape, pencil, etc. ✔ Assembly: ✔ Assemble the TV unit according to the manufacturer's instructions. ✔ This may involve attaching shelves, drawers, or other components. ✔ Mounting: ✔ For wall-mounted units, use a stud finder to locate wall studs. ✔ Mark the desired position for the unit on the wall. ✔ Drill pilot holes for screws. ✔ Attach the unit to the wall using appropriate screws and anchors. ✔ Ensure the unit is level and secure. ✔ TV Installation: ✔ If the unit includes a TV mount, attach it to the back of the TV. ✔ Carefully lift the TV and secure it to the mount. ✔Connect necessary cables. ✔ Finishing Touches: ✔ Conceal wires using cable management solutions. ✔ Clean up the area. Additional Considerations: ✔ Type of TV unit: The installation process may vary depending on the type of unit (wall-mounted, freestanding, etc.). ✔ Weight of the TV: Ensure the wall and mounting hardware can support the weight of the TV. ✔ Electrical outlets: Consider the proximity of electrical outlets for powering the TV and other devices. Safety Precautions: ✔ Always follow the manufacturer's instructions. ✔ Use appropriate safety equipment, such as gloves and eye protection. * If you are unsure about any part of the installation process, consult a professional. any problem contact us 7780517507 ,helpglobaltechnology2814@gmail.com, 24/7 service available visiting charge 100/

Other Specifications

key specification : 📺 TV Unit Installation – Key Specifications 🔧 1. Wall Type Assessment Identify wall material: Concrete, Brick, Wooden, or Drywall (Gypsum/POP) Use suitable anchor bolts and drilling tools for each wall type Confirm load-bearing capacity before mounting heavy units 📐 2. Mounting Bracket VESA-compliant wall mount (standard hole pattern: e.g., 100x100, 400x400) Fixed, Tilted, or Full-Motion (Swivel) bracket based on viewing need Use heavy-duty steel brackets for TVs 32" to 85" 📺 3. TV Size Compatibility Support for 24" to 85" TVs Match mounting bracket and back panel size with TV dimensions ⚖️ 4. Load Capacity Bracket and wall fixing should support 1.5x the weight of the TV Minimum load support: 25–80 kg depending on TV size 🧱 5. Cable Management Concealed wiring channels or cable ducts included Optional: Modular back panel for HDMI, power, set-top box, speakers 🔌 6. Power Source & Connectivity Properly earthed 5A/15A plug point behind or near the unit Provision for TV, internet router, soundbar, and console connections Use of spike guard or stabilizer for safety 📦 7. Cabinet/Panel Fixing (if any) Wall-hung or floor-standing unit securely mounted using L-brackets or clamps Back panel thickness: 18mm (BWR/BWP plywood or MDF board) Weight of unit plus TV must not exceed wall’s holding capacity 🔧 8. Alignment & Spacing Eye-level installation: TV center typically 42–48 inches from floor Maintain ventilation gap (2–4 inches) for heat dissipation Symmetrical alignment with furniture or wall décor 🔇 9. Add-ons (Optional) LED backlighting, floating shelves, hidden storage Soundbar brackets or speaker mounts Smart switch integration or IR remote cable extension 🧽 10. Finishing & Safety Use rubber grommets and cable sleeves for finish Child-safe height and edge protection for low-height units Ensure all screws, caps, and fittings are tightened and covered Let me know if you need this adapted for wall-mounted only, modular TV units, or a specific room type
key specification : 🎯 Best TV Unit Designs – Key Specifications 🪵 1. Material Quality Core Materials: BWR/BWP Plywood – moisture-resistant, long life MDF/HDHMR – smooth finish, ideal for painted/polished surfaces Pre-laminated boards – for budget/modular setups Surface Finishes: Laminates, Acrylic, PU paint, Veneer, or Back-painted glass 🖼️ 2. Design Style Wall-mounted floating units – sleek, space-saving Panel-based TV walls – wood, glass, or stone cladding backgrounds Floor-mounted cabinets – with drawers & open shelves Minimalist design – hidden wiring, clean lines, and compact storage Contemporary or Scandinavian – light colors, soft textures, soft-close hardware 📺 3. TV Compatibility Designed to fit TVs ranging from 32" to 85" VESA mount space and ventilation cut-outs integrated Includes space for set-top boxes, soundbars, consoles 🔌 4. Cable Management Built-in concealed wiring duct or cable tray Pre-cut holes for HDMI, power, and speaker cables Hidden plug points or pop-up power boxes optional 🗄️ 5. Storage Features Drawers: soft-close or push-to-open Open shelves: for décor or gadgets Closed cabinets: for dust-free storage Optional display niches or bookshelves on side panels 🌈 6. Lighting Integration LED strip lighting behind panels or under shelves Profile lights or spotlights for ambient glow Options for warm white, cool white, or RGB lighting 🛠️ 7. Dimensions & Layout Custom height: TV center at 42–48 inches from floor Width depends on wall — usually 5 to 9 feet wide Depth: Floating unit: 8–12 inches Floor-standing unit: 16–20 inches 🪛 8. Fixing & Support Wall panels secured with aluminum channels or wooden battens L-brackets or heavy-duty anchor bolts for load-bearing parts Modular units installed with cam fittings or mini-fix hardware 🎨 9. Color & Finish Options Dual-tone themes: e.g., white + wood, grey + walnut Matte / Glossy finishes based on style preference Neutral, pastel, or bold themes based on room palette 🧽 10. Maintenance & Durability Scratch-resistant laminates or glass options Moisture-resistant boards for durability in humid zones Easy-to-clean surfaces with a dry or damp cloth Let me know if you’d like TV unit design specifications for: Compact rooms (1BHK/2BHK) Luxury homes or villas Office or conference rooms Or even aesthetic themes like marble, wood, or glass finish.
key specification : 📦 Bursa TV Unit – Key Specifications 🪵 1. Material & Finish Board Type: Engineered wood (Particle Board / MDF / HDHMR) Finish: Melamine, matte laminate, or pre-laminated board Color Options: Walnut, oak, white, or dual-tone (depending on model) 📏 2. Dimensions Width: ~1800–2000 mm (70–78 inches) Height: ~1500 mm (59 inches) including panel Depth: 350–450 mm (14–18 inches) base unit 🧰 3. Tools Required Phillips screwdriver Allen key (usually included) Hammer (for dowels) Spirit level & measuring tape 🔧 4. Hardware Components Cam locks & cam bolts Screws and dowels Wall plugs & brackets (for wall mount) Hinges & handles (for cabinet units) Drawer sliders (if applicable) 🛠️ Bursa TV Unit – Assembly Instructions (Step-by-Step) 🧩 Step 1: Unpack & Identify Parts Lay out all panels and hardware Identify side panels, top/bottom panels, back panel, shelves, and cabinet doors 🧱 Step 2: Assemble Base Cabinet Fix side panels to the bottom panel using cam lock fittings Insert back panel (usually hardboard or MDF) using nails or screws Add top panel and align edges using a level 📦 Step 3: Install Shelves or Drawers Fit fixed or adjustable shelves using shelf pegs For drawers: attach drawer runners, assemble drawer box, and insert on tracks 🚪 Step 4: Attach Doors (if any) Fix hinges to doors Align and attach doors to the side panels Install handles or knobs 🖼️ Step 5: Attach Wall-Mounted Panel (Optional) Measure and mark panel height Install aluminum or wooden batten on wall using anchor bolts Mount panel securely and clip the TV unit panel on it 📺 Step 6: Mount TV or Add Display Items If wall-mountable, install VESA bracket and mount TV Use cable holes to conceal wires Add décor or speakers on open shelves ⚠️ Safety & Finishing Use wall anchor brackets for anti-tip safety (especially for kids) Confirm level and alignment before tightening final screws Clean with dry cloth only – avoid water contact on edges Would you like a visual diagram, PDF assembly sheet, or brand-specific version (e.g., from IKEA, Pepperfry, Urban Ladder, etc.) of the Bursa TV unit?
key specification : 🪚 Best Carpenter Near Me – Key Specifications 👷 1. Skill & Experience Minimum 3–5 years of hands-on carpentry experience Expertise in modular, traditional, and custom woodwork Knowledge of plywood, MDF, HDF, teak, laminate, veneer, etc. Ability to read design plans, sketches, or CAD drawings 🛠️ 2. Service Range Custom furniture making: beds, sofas, dining sets, etc. Modular units: kitchen, wardrobes, TV units Wooden partition work, ceiling panels, or storage lofts Repair, polishing, laminating, hinge & drawer fixing 📐 3. Workmanship Quality Smooth edge finishing, accurate joinery, and level installation Soft-close hardware, concealed hinges, and push-to-open fittings Neat laminate/veneer application without bubbles or gaps Proper use of adhesives, fasteners, screws, and brackets 🔧 4. Tools & Equipment Uses modern tools: jigsaw, circular saw, router, sander Portable toolkits for on-site work Owns measuring tools, spirit level, and edge banding machine (optional) 📅 5. Timeliness & Punctuality Sticks to committed project timelines Gives accurate work duration and material estimation Available for emergency/on-call repairs 🔒 6. Safety & Cleanliness Follows safe cutting and handling practices Leaves site clean after work Uses safety gear like gloves, mask, goggles (for dust-heavy jobs) 📞 7. Communication & Professionalism Understands client needs clearly Provides design suggestions & material alternatives Transparent billing & advance policies 🧾 8. Documentation & Quotation Gives detailed estimates for material, labor, and duration Ready to provide GST bill, if needed Can work with client-supplied materials or provide end-to-end solution ⭐ 9. Reviews & Ratings Verified ratings (4.5★ or above) on globaltechnology, global2814.com, or Google Portfolio of past work/photos Good word-of-mouth references locally 📍 10. Local Availability Based in or near your local area/colony/city Available for weekly contracts, hourly work, or project-based assignments ✅ Let me know your exact location (city/locality), and I can help you create a customized request like: “Best carpenter near me in [Hyderabad/Shadnagar] – expert in modular work, TV units, and custom wardrobes”.
key specification : 🪑 Furniture Carpenter – Key Specifications 👷 1. Expertise & Work Scope Skilled in custom and modular furniture making Experience with items like beds, wardrobes, sofas, chairs, tables, TV units, bookshelves, and office furniture Able to work with traditional joinery or modern hardware systems 🪵 2. Material Knowledge Familiar with: Plywood (BWR/BWP), MDF, HDF, Particle Board Solid wood: teak, sheesham, mango, pine Laminates, Veneers, Acrylic, PU paint, Glass fittings 🛠️ 3. Technical Skills Precision cutting, edge banding, drilling, routing, sanding Expert in using modern power tools and manual carpentry tools Skilled in drawer channels, hinges, locks, soft-close fittings, handles, and knobs 📐 4. Design & Measurement Reads and works from design sketches, 2D drawings, or CAD files Accurately measures space and adjusts furniture accordingly Provides on-site or off-site fabrication options 🔧 5. Installation Capabilities Proficient in assembling, fixing, and mounting furniture Wall-mounted units, modular fittings, and seamless edge alignment Neatly finishes laminate joints, corners, and drawer gaps 🧰 6. Tools & Equipment Owns basic and advanced tools: jigsaw, circular saw, spirit level, drill machine, clamps Uses glue, screws, nails, and brackets with proper anchoring methods Keeps safety tools like dust mask, gloves, and goggles 📦 7. Finishing & Polish Capable of laminate pressing, veneer finishing, melamine/PU polish, or paint touch-up Smooth and even surface finishing with attention to detail Optional texture matching and grain alignment 📋 8. Project Handling Can handle end-to-end furniture work or subcontract-based work Offers material suggestions, accurate BOQ, and delivery timelines Works on custom orders, repairs, and modular installations 🔎 9. Quality Assurance Ensures durability, stability, termite resistance, and edge sealing Adheres to quality standards in hardware and finishing Offers repair or warranty support (if included in scope) ⭐ 10. Client Satisfaction & Professionalism Good reviews or references from previous clients Transparent in costing, time estimate, and communication Maintains clean and organized work area during site work Would you like a version of this for residential, commercial, or modular furniture carpentry? Or a checklist for hiring a carpenter in your area?
key specification : 🛠️ Carpenter Service at Home – Key Specifications 🪚 1. Service Scope On-site work for minor & major carpentry jobs Includes: Furniture assembly & repair Modular wardrobe or kitchen fitting Door/hinge/lock adjustments Drawer sliders, shelves, TV unit, and wall panel fittings False ceiling or partition work (optional) 🪵 2. Material Handling Works with client-supplied materials or offers end-to-end solutions Proficient with plywood, MDF, HDF, laminates, veneer, and solid wood 🧰 3. Tools & Equipment Carries essential tools: Electric drill, jigsaw, spirit level, screwdrivers, clamps Manual tools: saw, hammer, chisels Safety gear: gloves, mask, goggles 📐 4. Precision Work Accurate measuring & marking Clean alignment and proper levelling Smooth finishes on laminate edges and fittings ⏱️ 5. Time & Punctuality Quick turnaround for basic jobs (1–3 hours) Larger installations handled over 1–2 days On-time arrival & flexible appointment scheduling 📦 6. Customization Offers tailored work for space-saving solutions Can make floating shelves, compact wardrobes, foldable desks, etc. Suggests practical design improvements on-site 🔧 7. Installation Services Assembles ready-made furniture (IKEA-type) Mounts TV units, mirrors, cabinets, curtain rods, etc. Handles hinge replacement, drawer repair, and door alignment 🧽 8. Clean Workmanship Leaves work area clean after job Disposes of dust, debris, and unused packing 🔒 9. Safety & Reliability Background-verified or locally trusted technician Uses proper anchoring methods for walls, concrete, or wood Offers safe solutions for kids/elderly (e.g., rounded corners, stable shelves) 🧾 10. Cost & Billing Transparent pricing: hourly or job-based rate Bill includes labor + material (if supplied by technician) Option for digital payment, invoice, or GST billing (if needed) Would you like a checklist for booking home carpenter service or a script for advertising this service locally (e.g., “Best carpenter service at home in Hyderabad”)?
key specification : 👖 Carpenter Pants – Key Specifications 🧵 1. Material & Fabric Fabric Type: Heavy-duty cotton canvas, denim, or poly-cotton blend GSM: 280–350 GSM (durable yet breathable) Stretch Options: 2%–5% spandex blend for flexibility (optional) 🧰 2. Pocket Configuration Multiple Utility Pockets: Deep front and back pockets Hammer loop (usually on left leg) Tool pockets for screwdrivers, pliers, pencils Reinforced cargo or side pockets for easy access 🔩 3. Reinforcement & Durability Double-stitched seams and bar-tack reinforcements at stress points Knee reinforcement panels (for kneeling work) Ripstop weave or tear-resistant fabric (optional for harsh work environments) 🪛 4. Fit & Comfort Relaxed fit or straight cut – allows movement during bending/kneeling Mid-rise or high-rise waist for secure hold during work Elastic waistband or belt loops for adjustable fit Gusseted crotch (in premium models) to prevent tearing 🌡️ 5. Weather Adaptability Breathable cotton for hot weather Insulated or flannel-lined versions for cold climates Water-resistant coating for outdoor use (optional) 👟 6. Safety Features Flame-retardant versions available (for industrial use) Reflective piping or strips (for night visibility, optional) Anti-static or ESD-compliant fabric (for electrical work zones) 🧼 7. Easy Maintenance Machine-washable Fade-resistant and wrinkle-resistant treatment Pre-shrunk for consistent fit after washing 🎨 8. Color Options Standard: Khaki, Navy Blue, Charcoal Grey, Olive, Black Customizable for branding or team uniforms 📏 9. Size Range Waist sizes: 28" to 44"+ Inseam lengths: 30", 32", 34" or adjustable hem Available in Regular, Slim, or Relaxed Fit 🧾 10. Branding & Customization Logo embroidery or patch options (for teams/companies) Tool belt compatibility or clip loops (on premium models) Would you like recommendations for top brands (like Dickies, Carhartt, Wrangler, etc.), or a comparison chart between carpenter pants and cargo pants?
key specification : 🖥️ Artiss TV Unit Installation – Key Specifications 📦 1. Package Contents Flat-pack design (DIY assembly required) Pre-drilled panels with hardware: Side panels, back panel, top/base boards Screws, dowels, cam bolts, nails, hinges Installation manual included Tools usually required: Phillips screwdriver, rubber mallet, drill (optional) 🪵 2. Material & Finish Made from engineered wood (particleboard or MDF) Surface: Melamine laminated, UV painted or high-gloss PU finish Color options: white, black, oak, walnut, matte/gloss variants 🔧 3. Installation Process Step-by-step modular assembly: Connect panels using cam-locks and dowels Install shelves, drawers, or cabinet doors Attach back panel (nails or screws) Place feet or base (if floor unit) Align top board and tighten all screws Estimated assembly time: 45–90 minutes for two people 🧰 4. Tools Required Cross screwdriver (mandatory) Drill (recommended for faster work, if no pre-drilled wall holes) Measuring tape, spirit level for wall-mounted units Wall plugs/anchors (if mounting to brick/concrete) 📐 5. TV Size Compatibility Designed to fit TVs ranging from 32" to 75" depending on the model Weight capacity: usually 30–50 kg on top shelf Shelves for AV devices, consoles, or decor (typically open or with doors) 🔒 6. Safety & Stability Anti-tip straps or wall anchors included for child safety Secure back panel mounting improves stability Soft-close hinges (if included) enhance door durability 🎮 7. Storage Features Open shelves, drawers, cabinets depending on the unit model Cable management holes for TV, speaker, or gaming console wiring Adjustable shelf height (in some models) ⚖️ 8. Dimensions & Weight Sizes vary: common width ranges 120 cm – 200 cm Height: 40–60 cm (floor unit), 80–180 cm (wall-mounted units) Total weight: 20–50 kg depending on unit type 🛠️ 9. Installation Location Floor-mounted or wall-mounted setup Requires flat surface and wall type confirmation (brick, cement, drywall) 📞 10. After-Sales & Support Online manual available Local technician or carpenter may be required for support if DIY fails Warranty typically 12 months (check seller policy) ✅ Would you like a step-by-step assembly checklist or a wall-mount safety guide for Artiss units?
key specification : 🖥️ Artiss TV Unit – Key Specifications 🪵 1. Material Construction Engineered wood (MDF or particleboard) Surface Finish: Melamine laminate (scratch & moisture-resistant) High-gloss PU finish (in select models) Matte or woodgrain textures also available 📏 2. Dimensions Width: 120 cm to 200 cm (depending on model) Height: 40 cm to 60 cm Depth: 30 cm to 45 cm Suitable for TVs from 32" to 85” 🎮 3. Storage Configuration Combination of open shelves, drawers, and cabinets Models may include: 2 to 4 drawers Push-to-open doors Tempered glass or wood shelves Designed for AV devices, consoles, remotes, and décor 🔌 4. Cable Management Built-in cable holes or channels Keeps wires hidden and organized for set-top boxes, routers, and consoles 🛠️ 5. Assembly Flat-pack design with detailed manual Cam-lock, screw, and dowel assembly Requires basic tools: screwdriver, hammer, and optionally a drill DIY-friendly but may need 2 people for large units 📺 6. Weight Capacity Top surface: Supports 30–50 kg (depending on length and design) Internal shelves: Support 5–10 kg each 🎨 7. Design & Aesthetics Minimalist, Scandinavian, or modern designs Color options: Matte Black, High-Gloss White, Natural Oak, Walnut, Grey, Concrete Finish LED lighting included in some models (with remote control) 🔒 8. Safety & Stability Anti-tip wall straps included for safety (especially with kids) Stable base or wide legs for floor-standing units Smooth drawer glides and soft-close options in premium models 🧼 9. Maintenance Easy-to-clean surfaces (wipe with soft cloth) Resistant to light scratches and stains Pre-laminated to prevent moisture absorption 📦 10. Packaging & Delivery Ships in 1–3 flat-packed boxes Clearly labelled parts and screws Online manuals and customer support available from Artiss/Seller Would you like a model comparison (e.g., Artiss Luzon vs. Artiss Migo), or a TV unit buying guide based on room size or design theme?
key specification : 🛠️ 2BHK Carpenter Work – Key Specifications 🪵 1. Scope of Work Full furniture setup for: 2 Bedrooms (wardrobes, cots, side tables) Hall/Living Room (TV unit, sofa framing, partitions) Modular Kitchen (cabinets, lofts, trolley fitting) Dining (table, crockery unit) Balcony/Utility (shelves, storage) 🧰 2. Materials Used Plywood: ISI-marked BWP/BWR-grade for wet areas (kitchen, utility), MR-grade for dry zones Shutters/Finish: Laminates (1mm), acrylic, membrane, PU paint, or veneer Hardware: Branded hinges, drawer channels, lift-up fittings (Hettich, Hafele, Ebco, Godrej, etc.) Soft-close & push-to-open fittings (optional) 📐 3. Design & Customization Tailored to flat layout & family needs Modular design with space optimization Sliding or hinged wardrobe styles TV unit with open shelves or back panel Kitchen: L-shape, U-shape, or parallel layout 🔧 4. Tools & Installation Tools: drill, saw, jigsaw, level, clamps Accurate levelling, edge banding, corner joining Clean, dust-controlled on-site work Option for factory finish & on-site fitment ⏱️ 5. Project Timeline Typical duration: 10–15 days (depending on finish & scale) Parallel electrical/plumbing coordination possible 📏 6. Measurements & Planning Site visit for measurement 2D drawings or 3D designs shared pre-installation Modular cut list created before carpentry begins 🪑 7. Furniture Types Included Master Bedroom: King/queen cot, 2-door/3-door wardrobe, dressing unit Children’s Room: Cot, study table, 2-door wardrobe Living Room: TV unit, shoe rack, display shelves Dining: Crockery cabinet or wall shelves Kitchen: Base units, wall units, tall units, lofts Optional: Folding tables, pooja unit, bar unit 💡 8. Add-on Services False ceiling wood framing Door frame & shutter installation Handle/lock replacement Mirror, curtain rod, or wall-hung element fitting 🔒 9. Safety & Durability Termite-resistant plywood Smooth, safe corners & edges Moisture-proof finish in wet areas 🧾 10. Quotation & Billing Quoted by sqft (wardrobes/kitchen) or lump-sum for full project Includes material + labor breakdown GST billing available Warranty (1–5 years based on vendor) Would you like a ready-to-use 2BHK carpenter work checklist, sample quotation format, or a WhatsApp business ad script to promote carpenter services for 2BHK homes?
key specification : 3BHK Carpenter Work – Key Specifications 🧰 1. Scope of Work Full woodwork for: 3 Bedrooms: Beds, wardrobes, study tables, dressing units Living Room: TV unit, wall panels, partitions Dining Area: Crockery unit, bar cabinet (optional) Kitchen: Modular kitchen (base + wall cabinets + lofts) Balcony/Utility: Cabinets, storage shelves, countertop 🪵 2. Materials & Finish Plywood Types: BWP (Boiling Waterproof) for kitchen/utility MR (Moisture Resistant) for bedrooms/living Finish Options: 1mm Laminates (matte, gloss, texture) Acrylic, membrane, PU paint, or veneer (based on budget) Edge Banding: Matching PVC edge tape Handles: Branded SS/Aluminium or profile handles ⚙️ 3. Hardware & Accessories Hinges, channels, and fittings: Hettich / Ebco / Hafele / Godrej Soft-close options for shutters and drawers Lift-up fittings, magic corners, tall units for kitchen Drawer locks, wardrobe pull-outs, mirror units 📏 4. Custom Measurements Wardrobe sizes: Standard 7' or customized height Kitchen: L-shape, U-shape, parallel layout Cot: Queen/King size with storage (hydraulic or manual) TV unit: Up to 8’–10’ wall coverage Dining: 4/6 seater setup, crockery unit size 4’–6’ 📐 5. Design & Layout Modular layout optimized for space efficiency Custom partitions & false paneling (optional) 2D layout or 3D render for approval before execution Site measurement & design finalization prior to cutting 🏠 6. Rooms Covered Master Bedroom: Cot with storage, 3-door wardrobe, dresser Kids/Guest Room: Single/double cot, study table, wardrobe Third Room: Multi-purpose – home office, guest, or kids’ room setup Living Room: Floating TV unit or console, shoe rack Kitchen: Full modular, chimney and hob cutouts Dining: Wall-mounted crockery or showcase unit ⏱️ 7. Work Timeline Time required: 15–25 days (with material availability) Modular finish may reduce on-site time Parallel work in multiple rooms for speed 🔒 8. Safety & Quality Termite-resistant and moisture-proof boards Rounded corners (child safety) Smooth finish with quality polish or laminate fixing Screws, fasteners, and hardware all rust-free 🧾 9. Billing & Quotation Costing methods: Per Sq.ft.: wardrobes, kitchen Lump sum: full 3BHK package Includes labor, material, transportation Optional: GST billing, warranty (1–5 years) 🧼 10. Post-installation Service Cleaning after work completion Inspection of hinges/drawers One-time adjustment visit (optional) User guidance on maintenance Would you like a 3BHK carpentry checklist, a sample quotation format, or help creating a promotional ad banner or script for your carpentry business?
key specification : 4BHK Carpenter Work – Key Specifications 🧰 1. Scope of Work 4 Bedrooms: Cots, wardrobes, study units, dressers, side tables Living Room: TV panel unit, shoe rack, decorative paneling, partitions Dining Area: Crockery unit, bar counter (optional) Modular Kitchen: Base units, wall units, lofts, tall units Utility/Balcony: Closed storage, open shelves, countertop fitting Pooja Room or Study/Office Room (optional): Pooja unit, desk, bookshelf 🪵 2. Materials Used Plywood Grades: BWP (Boiling Waterproof) for wet areas (kitchen/utility) BWR or MR grade for dry zones (bedrooms/living) Finish Options: 1mm Laminates (matte/gloss/textured) Premium finishes: PU paint, acrylic, membrane, veneer Back Panels: MDF or pre-laminated particle board Edge Banding: PVC tape for safety and finish ⚙️ 3. Hardware & Accessories Hinges/channels: Hettich, Hafele, Ebco, Godrej Soft-close fittings for drawers & shutters Accessories: Magic corner, tall pantry units, bottle pull-outs Wardrobe add-ons: Mirror units, internal drawers, sliding tracks 📐 4. Design Customization Modular + custom mix based on layout Design approval with 2D CAD drawings or 3D renders Theme-based finishes: minimalistic, classic, or luxury False ceiling wooden support or wall panel integration 📏 5. Typical Sizes Wardrobes: 7’ to 8’ height, 2–4 shutters, sliding/hinged Cot: Queen/king size with under-storage Kitchen: U-shape, parallel, L-shape with tall units TV Unit: 6’–12’ wide wall-mounted or floor unit Study/Office Desks: 3’–5’ with overhead or side storage ⏱️ 6. Work Timeline Estimated time: 20–35 days, depending on: Finish type (laminate vs. PU vs. acrylic) On-site vs. factory finish Parallel work in rooms possible 🔒 7. Durability & Safety Termite-resistant plywood Moisture-proof laminate for kitchen and utility Rounded corners (child safety) Anti-tip wall anchors for tall units 🧾 8. Billing & Quotation Costing can be: Per Sq.ft. (wardrobes, kitchen) Package-based (per room/entire house) Includes: Material + labor + transportation + installation Optional: GST billing, warranty (1–5 years) 🧼 9. Post-Installation Service Cleaning and alignment check Hardware testing (soft-close, drawer glide, locks) One-time after-service visit (if offered) 💡 10. Add-on Services Wooden false ceiling framework Decorative wall paneling Mirror framing, curtain rod, pelmet installation Bedside lighting or study light carpentry work Would you like a complete 4BHK furniture checklist, a sample quotation with per-room costing, or a WhatsApp promo post template to offer 4BHK carpenter packages?
key specification : Villa Carpenter Work – Key Specifications 🏡 1. Scope of Work Bedrooms (3–6 rooms): Cots, wardrobes, dressers, side tables Living Room(s): Grand TV unit, display panels, partitions Dining Area: Crockery unit, buffet table, bar cabinet Modular Kitchen: Island unit, tall storage, pantry, lofts Staircase & Hallways: Wooden railing, storage under stairs Balcony/Deck/Patio: Outdoor seating, planters, ceiling rafters Pooja Room: Traditional or modern carved wood units Home Office or Library: Desk units, book racks, cabinetry Garage/Utility Rooms: Tool cabinets, overhead shelves 🪵 2. Materials Used Plywood: ISI-marked BWP/BWR for durability & moisture resistance Solid Wood Accents: Teak, oak, or sheesham for high-end finish areas Finishes: Laminates: Gloss/matte/textured PU Paint, Acrylic, Membrane, or Veneer (for luxury finish) Back Panels: Pre-laminated MDF or PVC foam board Edge Banding: High-gloss or PVC taping ⚙️ 3. Hardware & Accessories Premium brands: Hettich, Hafele, Blum, Ebco Soft-close hinges, tandem box drawers, lift-up units Magic corners, tall pantry pull-outs, under-sink organizers Wardrobe: Sliding systems, pull-down hangers, dressing mirrors 📏 4. Standard Sizes & Elements Cots: King/Queen size with hydraulic storage Wardrobes: Full-height (up to 9 ft), modular with internal drawers Kitchen Island: 5’–7’ with storage + seating TV Unit: Up to 12’ wide, with LED backlighting (optional) Study: L-shaped or wall-to-wall desks with cabinets 📐 5. Design & Customization Modular & handcrafted options Villa-specific luxury finish layout Carved, backlit, or designer paneling Theme integration (modern/classical/minimalistic) 🛠️ 6. Installation Process Site visit: Measurement + 3D design suggestions Production: Factory or on-site cutting & finish Execution: Room-wise phased installation with dust control Tools: Precision carpentry equipment used for clean edges 🕒 7. Timeline Average duration: 30–60 days, depending on: Number of floors/rooms Finish complexity (PU paint takes longer than laminates) Custom carving or premium veneer needs 🧾 8. Costing & Quotation Sqft-based + Item-wise hybrid quote Separate billing for: Material Labor Transport & installation GST invoice available Warranty: 3–10 years (based on brand & materials) 🧼 9. Post-Work Services Final inspection & alignment Deep cleaning after major carpentry One-time service revisit Usage & maintenance guidance for each unit ✨ 10. Add-On Work (Optional) Wooden false ceiling frames Staircase wood cladding Home theatre paneling Partition units with sliding/lattice/jali Exterior grade waterproof wood for balconies & pergolas Would you like a villa furniture planning checklist, a PDF quotation template, or a promotional flyer script for offering villa carpentry packages?
key specification : Apartment Carpenter Work – Key Specifications 🧰 1. Scope of Work Bedroom: Wardrobes, beds with storage, side tables, dressing units Living Room: TV unit, shoe rack, wall shelves, partition (if needed) Dining Area: Compact crockery/storage unit Kitchen: Modular setup with base units, wall units, lofts Utility: Storage cabinet, washing machine stand/shelf Study/Workstation (optional): Foldable desk, bookshelf Balcony: Open shelf, vertical garden frame (optional) 🪵 2. Materials Used Plywood Grades: BWP (Boiling Waterproof) – Kitchen, Utility MR (Moisture Resistant) – Wardrobes, Living Room Back Panels: MDF or pre-laminated particle board Edge Banding: PVC tape – clean, safe finish Finish Types: Laminates – Matte, Gloss, Texture Acrylic, PU, or Membrane – For premium upgrades ⚙️ 3. Hardware & Fittings Soft-close hinges & drawer channels Telescopic or tandem box drawers Brands: Ebco, Hettich, Hafele, Godrej Modular kitchen accessories: cutlery tray, pull-outs, bottle rack Wardrobe fittings: sliding doors, internal drawers, mirror panels 📐 4. Customization & Design Modular designs adapted for limited apartment space Wall-mounted and foldable furniture (for compact flats) Custom shelving for vertical storage Sliding doors & corner units to save space 📏 5. Typical Furniture Sizes Wardrobes: 6–7 ft height standard; sliding or hinged Beds: Queen/King with under-storage TV Unit: 5–8 ft wall length Kitchen: L-shaped, parallel, or U-shaped Dining: Wall-attached foldable table (optional for small flats) 🕒 6. Timeline 1BHK: 7–10 days 2BHK: 10–15 days 3BHK: 15–20 days 4BHK: 20–30 days (Depends on size & finish type) 🔒 7. Safety & Quality Termite-proof and moisture-resistant materials Rounded edges for child safety Branded screws, handles, and fasteners All storage units with proper ventilation (especially in kitchen) 🧾 8. Costing & Quotation Per Sqft pricing for wardrobes, kitchen, and storage units Itemized billing for beds, TV units, etc. Optional: GST invoice, 1–5 year warranty Includes: Material, Labor, Transport, Installation 🧼 9. Post-Installation Service Unit alignment check Cleaning & handover after installation One-time adjustment visit (optional) Maintenance tips (especially for PU/acrylic finishes) 🛠️ 10. Popular Add-ons False ceiling woodwork Mirror framing Wooden partitions or jali designs Compact mandir units Foldable work-from-home desks Would you like a room-wise carpentry checklist, a quotation format, or a flyer/post ad to promote your apartment carpenter services?
key specification : 🧒🛠️ Children’s Room Carpenter Work – Key Specifications 🎯 1. Scope of Work Bed: Single, bunk, or trundle bed with storage Wardrobe: 2–3 shutter with open shelves or loft Study Unit: Table with drawers, bookshelf, pinboard/whiteboard Toy Storage: Toy chest, open rack, pull-out baskets Wall Units: Floating shelves or theme-based display racks Seating: Window seating or reading corner bench (optional) 🪵 2. Materials Used Plywood: BWP/BWR for strength & durability Back Panels: Pre-laminated MDF or MDF with design cutouts Edge Banding: PVC round-edge for child safety Finish Types: Laminates – pastel, themed, matte or glossy PU Paint or Membrane – for premium/custom look ⚙️ 3. Hardware & Fittings Soft-close drawers & shutters for finger safety Anti-tip wall brackets for wardrobes and tall shelves Child-safe handles (rounded, rubberized, or embedded) Branded hinges & channels (Hettich, Ebco, Hafele) 🖍️ 4. Design Features Themed Furniture: Car, princess, jungle, space, etc. Convertible Units: Foldable study tables or pull-out beds Growth Adaptability: Adjustable study heights or modular beds Interactive Panels: Chalkboard/whiteboard/pegboard for creativity 📏 5. Standard Sizes Bed: 3'x6' (single), 4'x6.5' (bunk), with pull-out storage Wardrobe: 5’–6’ H, 2 or 3 shutters with drawers Study table: 3–4 ft wide, 2 ft deep, 2.5 ft high Shelves: 12”–15” depth, adjustable or floating 🛡️ 6. Safety Considerations Rounded corners everywhere No sharp edges or glass elements Wall-mounted units firmly anchored Non-toxic, low-VOC polish or paint Ladder support and railing for bunk beds 🧾 7. Costing & Billing Per item or per sqft quote Includes material, labor, finish, and installation GST billing optional Warranty: 1–5 years (depending on finish and hardware) ⏱️ 8. Work Timeline Basic setup: 7–10 days Theme-based / custom: 15–20 days (Design time varies based on detailing & painting) 🧼 9. Post-Work Support Final safety inspection Hinge & alignment check Cleaning & dusting before handover One revisit for adjustments (if part of service) ✨ 10. Add-On Options Wall-mounted study fold units Pull-out writing boards or hidden toy chests Wooden ceiling elements or decorative trims Themed wall panels or name boards Mirror with safety film (for dresser) Would you like a PDF checklist, WhatsApp ad script, or a theme-based design catalog for children’s rooms?
Key specification : 🪚 1BHK Carpenter Work – Key Specifications 🧰 1. Scope of Work Bedroom: Wardrobe, bed with storage, side table (optional) Living Room: TV unit, open/closed shelves, shoe rack Kitchen: Base and wall cabinets, loft storage Utility (if available): Washing machine stand/shelf Study/Work Corner (optional): Compact wall-mounted desk 🪵 2. Materials Used Plywood: BWP (Boiling Waterproof) – Kitchen/utility BWR or MR grade – Bedroom & living areas Finish Options: 1mm Laminates – Matte, gloss, or texture Premium options: Membrane, PU Paint, or Acrylic (optional) Back Panels: MDF or pre-laminated board Edge Banding: PVC for durability and finish ⚙️ 3. Hardware & Fittings Hinges/Channels: Soft-close (optional), standard telescopic Handles: Stainless steel or powder-coated options Brands Used: Ebco, Hettich, Hafele (as per budget) Add-ons: Locks, cutlery trays, pull-out baskets (for kitchen) 📐 4. Standard Sizes Wardrobe: 6–7 ft high, 2–3 shutters Bed: 5'x6.5' (queen size), box or hydraulic storage TV Unit: 5–6 ft wide (wall-mounted or floor unit) Kitchen Units: Custom-fit for parallel or L-shaped layout Loft Storage: Up to 2 ft height above wardrobes or kitchen 🛡️ 5. Safety & Quality Termite-proof plywood Moisture-resistant laminates for kitchen and utility Rounded edges (child-safe optional) Wall-anchored tall units for safety ⏱️ 6. Work Timeline Average completion: 7–10 working days Timeline depends on design complexity and finish type On-site or factory-made (modular) options available 💰 7. Costing & Billing Per Sqft or itemized pricing Basic laminate finish – budget-friendly Optional premium upgrade (PU, acrylic, membrane) GST invoice and warranty (if applicable) 🧼 8. Post-Installation Support Cleaning and final polish Alignment check for drawers and shutters One-time visit for adjustments (if service includes) ✨ 9. Popular Add-Ons Wall-mounted bookshelves Shoe cabinet with seating Dressing mirror with storage Compact pooja unit or corner shelf

Filter tags

This is your website preview.

Chat with us on WhatsApp

Make an enquiry

Share Us On

30min INR 210 INR 300 https://www.globaltechnology2814.com/services/tv-unit-installation/121

Description

Other Specifications

Filter tags

Subscribe for latest offers & updates